Search found 17 matches

by puddinboo
Thu Jan 21, 2010 12:37 am
Forum: RCA Discussion
Topic: nledqrup
Replies: 0
Views: 5947

Re: Does this look swollen to you?

HI.... replaced all 4 of those caps, and still a no-go. The repairman didn't find anything else wrong with the rest of the board. So still getting the 5 flashes. Any more ideas? Thanks did u check all conections everywhere (unplug and plug connections back in could be dust or dirt causing problems ...
by puddinboo
Mon Jan 11, 2010 12:12 am
Forum: RCA Discussion
Topic: tblwzuhm
Replies: 0
Views: 891

Re: HD61LPW52 no lamp or color wheel power

from everything i read, the color wheel should spin up even with the lamp removed (make sure you have something holding down the lamp door switch or nothing will happen :). 321v might be ok, another user reported 324 or so on their 50"... You won't really be able to test the power coming out of the...
by puddinboo
Sat Jan 02, 2010 4:37 am
Forum: RCA Discussion
Topic: ogrvigbu
Replies: 0
Views: 3302

Re: rca m50wh92syx1 question about bulbs not lasting

just to update u guys my tv is still going strong must have been a bad connection.
by puddinboo
Mon Nov 16, 2009 2:48 am
Forum: RCA Discussion
Topic: nledqrup
Replies: 0
Views: 5947

Re: Blinking Lights - Worth Noting

My set an Infocus 61MD10 had the light engine replaced 2 years ago under warranty...now the blue lights comes on and blibks 5 times( i still have sound) and then does it again,thenafter about 30 seconds the picture comes back and all is good for about 10 mins or sometimes it goes for an hr...is thi...
by puddinboo
Thu Nov 05, 2009 12:59 pm
Forum: RCA Discussion
Topic: ogrvigbu
Replies: 0
Views: 3302

Re: rca m50wh92syx1 question about bulbs not lasting

puddinboo, do you still have that color wheel off that RCA? If so I am interested in buying it from you! actualy I didn`t have to replace anything on this tv to fix it, I`m strarting to think it was a bad connection somewhere. Red I`m sorry but I have no parts from this tv as they are all working a...
by puddinboo
Thu Nov 05, 2009 2:01 am
Forum: RCA Discussion
Topic: ogrvigbu
Replies: 0
Views: 3302

Re: rca m50wh92syx1 question about bulbs not lasting

just an update tv is still going strong with the old bulb :)
by puddinboo
Mon Oct 19, 2009 6:14 pm
Forum: RCA Discussion
Topic: ogrvigbu
Replies: 0
Views: 3302

Re: rca m50wh92syx1 question about bulbs not lasti

if you had an arc, you're lucky it still works - better to use a lightbulb with some wires to slowly drain big caps like that -- anyways, it's possible that the arc re solidified a bad solder joint or something or perhaps you just had a loose/bad connection between the ps and the ballast, or the ba...
by puddinboo
Sun Oct 18, 2009 11:49 pm
Forum: RCA Discussion
Topic: ogrvigbu
Replies: 0
Views: 3302

Re: rca m50wh92syx1 question about bulbs not lasting

well my tv has been running today for 8hrs straight without a glicth.could it be the cap on the ballast board is my question??
by puddinboo
Fri Oct 16, 2009 11:22 pm
Forum: RCA Discussion
Topic: ogrvigbu
Replies: 0
Views: 3302

Re: rca m50wh92syx1 question about bulbs not lasting

ok my tv has been working flawless for about 4 hrs straight now after unplugging tv and shorting out capacitor 450v 47uf kxg on ballast board .when shorting out cap got a good spark from it .I`ll keep u guys updated if interested.seems weird to me ??
by puddinboo
Wed Oct 14, 2009 4:50 pm
Forum: RCA Discussion
Topic: ogrvigbu
Replies: 0
Views: 3302

Re: rca m50wh92syx1 question about bulbs not lasting

I went out and got a 52" samsung lcd Tv with a 4 yr extended warranty .awsome pic on it too, I hope this 1 will last .but I do have parts from this rca TV if anyones interested ,but I don`t know whats good or bad though ,I think the color wheel is ok since it runs nice and smooth.as for the power bo...
by puddinboo
Tue Oct 13, 2009 8:45 pm
Forum: RCA Discussion
Topic: ogrvigbu
Replies: 0
Views: 3302

Re: rca m50wh92syx1 question about bulbs not lasting

My power supply board is more square than the 1 in the pic.
by puddinboo
Tue Oct 13, 2009 8:31 pm
Forum: RCA Discussion
Topic: ogrvigbu
Replies: 0
Views: 3302

Re: rca m50wh92syx1 question about bulbs not lasting

I trippled check (observed caps )all look good I think its time to buy a new tv don`t want to keep spending money on this thing.
oh yeah it looks like somebody replaced the caps on the board too .this tv was a replacement tv from rca hmmmmmmmmmmmmmm?
by puddinboo
Tue Oct 13, 2009 3:15 pm
Forum: RCA Discussion
Topic: ogrvigbu
Replies: 0
Views: 3302

Re: rca m50wh92syx1 question about bulbs not lasting

well igot my new bulb from DM and still having the same problem ,checked color wheel runs nice and smooth ,and then the tv powers down u can here a clicking noise each time it powers down and then back up just no pic it will only stay powered on for about 5-10 secs before it shuts down each time so ...
by puddinboo
Mon Oct 12, 2009 7:18 pm
Forum: RCA Discussion
Topic: ogrvigbu
Replies: 0
Views: 3302

Re: rca m50wh92syx1 question about bulbs not lasti

i think the voltage going to the bulb will blow out an average multimeter when it's firing the bulb -- 15,000v. I won't pretend to be an electrical engineer, but knowing i was dealing with that kind of voltage was enough for me to bring mine in for a check up. lol I just tried using my multimeter a...
by puddinboo
Sun Oct 11, 2009 2:24 pm
Forum: RCA Discussion
Topic: ogrvigbu
Replies: 0
Views: 3302

Re: rca m50wh92syx1 question about bulbs not lasti

mitchkramez wrote:the power going to the ballast is DC i believe -- but i don't think you can measure the power to the bulb w/o some expensive equipment
thx for your replies. I thought u might be able to just use a multi meter to check ?
by puddinboo
Sat Oct 10, 2009 11:50 pm
Forum: RCA Discussion
Topic: ogrvigbu
Replies: 0
Views: 3302

Re: rca m50wh92syx1 question about bulbs not lasting

wonder how or if u can check the output of the ballast to the bulb. and wether the voltage going to the bulb is ac or dc ?
by puddinboo
Sat Oct 10, 2009 2:40 am
Forum: RCA Discussion
Topic: ogrvigbu
Replies: 0
Views: 3302

rca m50wh92syx1 question about bulbs not lasting

I have a question about my rca 50" dlp model M50WH92SYX1 which I purchased in 2007 ,1st bulb (osram) went in 9 months,2nd bulb (phillips)went in 8 months .I was wonddering if turnning the tv off and on about 6 times a day to save the life of the bulb is actually killing it quicker.should I just turn...

Go to advanced search