FixYourDLP.com Forums

Thanks so much for responding to my dilema. Yes the switch is taped as you suggested a few threads ago. I have purchased a second ballast just to try to eliminate that issue. I get the same response with no lamp lighting. Incidently, the output voltage to he lamp is a mere 7.86vdc as measured direct...

Good responses from both Eddie and Mike and thank you both. I have the little blue swith taped in the downward position and stll have nothing. I have ordered a new ballast although the current one has less than two hours on it. This due to having only 5.65vdc measured at the output to the lamp. I wi...

I would very much like to have Eddie weigh in on this. He has seen all the exchanges and most likely is familiar with the solution. I'm experiencing the same problem. But I can get it to work -- kind of. HLR6167w Color wheel was replaced, and then the new one started grinding. Replaced Color wheel (...

Can someone explain the "reset timer" as I have not heard of his yet. For six months now I have been trying to resolve my issue of: -Replace lamp -Replace color wheel -Replace ballast -Set worked for about 2 weeks then screen went black and lamp apparently does not illuminate. I even paid an on-line...

No I have not learned anything new about this. I have a difficult time thinking that at least one person on this forum has hasn't figured out the problem though. It just seems to be such a common occurance that someone should have figured it out by now. If you know of the location of a schematic, I ...

It sounds as if this lamp out, ballast bad and color wheel shattering are all very common with these Samsungs. I am sufferin through the same woes. I have replaced everything and the unit worked fine for a couple weeks but now the lamp will not turn on. I do not get the clicking sound out of the bal...