FixYourDLP.com Forums

Well i got a HL-n617 lamp not comming on at all, bulb is ok. Color wheel looks perfect. I took it out and it seems as tho it spins kind of stiff, so i took it out put it in another TV and it spins up fast, but really noisey. Is there any reason it would spin in 1 tv and not in the original? i know i...

all the big wires shouldn't be near the DMD board, but different models may have them close, btw i moved my DLP 6-7 times from houses, superbowl parties and all other things. When the board is locked down in should never move, my guess is they left it a bit loose from factory or something. Once lock...

I removed my dmd board and i had the same problem, if you loosen the screws holding the board to the lens assembly u can slightly push it around to "level" out the screen. (FYI its on a mirror so up is down and vise-versa) Then use (mute-1-8-2-power) and u can adjust total height in there. or just u...

Bingo! problem solved, word for everyone, watch where u remove the 4 pin wire from. there are 4 different ports you can plug it into on the analog board if you pick the wrong one... TV wont turn on. Ultimate fix was digital board thx for all the help from ninja and everyone else. If anyone needs hel...

SO its (mute 1 8 2 power) all at the same time? or right after one another? Cant seem to get this mode on either of my 2 DLPs that are broke. 1 has a lamp thats on 1 that never gets a lamp on. will the display pop up without a working lamp in the tv?

I figured the analog board was like a PC where only 1 plug can go into 1 socket, but the analog board was nice enough to have a 4 pin plug that fits into 2 diffent sockets, from wire length i would assume it would go in the one further away but hey i throw it back together (again) with the 4 pin in ...

well new digital board and nothin, acting exactly the same as before? what are the odds of a bad board from samsungparts? looks like the dmd board is 1 arm and 2 legs. and i can't afford that.... Is there anything i coulda missed? do i have to program new board or switch over a part i missed?

So ovadoggvo, in your boot sequence, if color wheel doesn't spin up, then lamp will never turn on? Can you watch color wheel without lamp in? (of course with lamp door switch engaged) Or are you lsitening for just the sound of it spinning? (high pitch warm up noise) Ive got lamp never comming on, bu...

Well, to begin this site has been great for troublshooting ideas, but i have a question to add. My DLP started the familiar green checkerboard behind the menus on cable input, and seemed to work fine on HDMI input, but i took the back off cleaned it up in there, put it all back together and ... Now ...