FixYourDLP.com Forums

Depending on the vendor you are working with. I'd recommend taking a very clear digital photo of the front and back of the DMD and emailing it.

:o Well, it was not the ballast. It certainly looks like a color wheel kinda came apart. The bulb is fine, the rest of the set is a bit dustier than I remember from 15 months ago, but here is what I saw once I got the back off and started looking: :cry: :cry: :cry: Think I can fix this one? a little...

:( That is what I was thinking also. When I get the back off, I can safely bypass the interlock :mrgreen: and see if I can locate the sound a little closer. With my luck the Ballast and the Color wheel are close enough together that I'm not easily going to be able to tell. Since D-M has 32 of them l...

Ok, after fixing my HLN5065W DLP :D over a year ago using the data from this forum, I encountered the following this morning: Turned on Set, all 3 LEDS started blinking (lamp failure) Unplugged Set (I've had bogus 3-LED statuses due to power issues) Applied power and tried to start set Startup tones...

I just did one on a HLN5065W, and found that it wasn't really that difficult. I should have taken more pictures. I used the directions for changing the DMD to show how to get the TV apart. Pulled the back cover, removed the screws holding the analog board and the chassis, disconnected the chassis in...

:D :D :D :D :lol: Got the Digital board this week (been busy) and finally replaced it. Not difficult at all, took my time and labeled the right-hand cables as I pulled them. Other than a little forgetfulness on the chassis interlock switch, it fired up beautiful! Have to figure out what to do with t...

What the heck? D-M suggested disassembling the set to determine which digital board I have, which I did. Upon reassembly, my problem cleared up, and the picture is beautiful again. :o I didn't unplug anything, just carefully moved everything so I could get the shield off. There was, considering the ...

D-M has two of the boards for the HLN5065:

AA41-00851B 20031227
AA41-00851B L62A

Do I need to pull my TV apart to figure which I need before I order?

From the photos on their website the parts look the same down to the info etched on the board itself, but that's just photos...

:D thanks for the info. The MUTE+182 service menu works and is in "front" of the lines (as is the TV menu), so it's sounding like the Digital board. I did have a brief period of time where the picture cleared up, and HD looked as great as usual, but on the next powerup the problem was back and has n...

Had my HLN5065WX/XAA since 6/2004, had a color wheel replaced in '05 but been great until this weekend. We're seeing horizontal lines of pixels on all input sources (and I have something on almost everything), including Component, Composite, Antenna and VGA depending on the contrast of the source. F...