Search found 267 matches
- Tue Jun 03, 2014 6:01 am
- Forum: Samsung Discussion
- Topic:
- Replies: -1
- Views:
Re: Samsung HLR 6167 WAX/XAA
Howard, From your description about your HLR6167WAX 61" DLP Television.. it seems like your issue is related to a collapsing light tunnel. The light tunnel is made up of 4 mirrors that reflect the light of the elliptical lamp through to the DMD chip. These four little mirrors collapse over time and ...
- Tue Jun 03, 2014 5:55 am
- Forum: Samsung Discussion
- Topic:
- Replies: -1
- Views:
Re: Samsung HLP5063WX/XAA 50" DLP
Howard, I think I know what your problem with the HL-P5063WX color offset is. I believe you have swapped out the original gold bearing BP96-00674A colorwheel with the air bearing version whixh is newer. The BP9600674A has two versions that when one is switched with another, the jumper CN1 needs to b...
- Tue Jun 03, 2014 5:45 am
- Forum: DLP, LCD Projection, and other RPTV
- Topic:
- Replies: -1
- Views:
Re: Mitsubishi 65" DLP WD-65732 wont turn on
Rammstein, Based on your information about your WD65732 65" Mitsubishi TV - I would sat that Grayfox is correct. The chances are that you bought a generic 915P049010 lamp. There are times that the chinese lamp makers use a 3.5kV lamp instead of the original or Philips 15kV lamp. This can cause your ...
- Sat Feb 22, 2014 7:00 am
- Forum: Toshiba DLP Discussion
- Topic:
- Replies: -1
- Views:
Re: 44NHM84 FLASHING GREEN OPERATION INDICATOR
Jpauly, Just because the lamp lights for 4 seconds doesn't make it a good lamp... Do you remember where you ordered the lamp from? The generic lamps have issues exactly as you are describing! Can you pull the lamp out and see if it has any markings on it? The bulb itself should have a Philips stampi...
- Sat Feb 22, 2014 6:51 am
- Forum: Sony LCD Projection Discussion
- Topic:
- Replies: -1
- Views:
Re: Are Philips truly better than "generic" Lamps???
Guys, The Philips lamps are absolutely better for your Projector or Projection TV than the generics... Here is a good article explaining the difference between OEM and Generic replacement lamps for your projector: http://www.discounttvlamps.com/t-oemvscompatiblefp.aspx I think build quality and reli...
- Sat Feb 22, 2014 6:47 am
- Forum: Mitsubishi Discussion
- Topic:
- Replies: -1
- Views:
Re: Mitsubishi WD-60638 colors are red and green
Toddmw, Sorry about the late reply as I've been out of town and away from computers again... The issue that you are experiencing does seem to be hardware related... Since the discoloration is also on top of the Menu system, this means the origin of this problem is Digital... if this was an analog is...
- Sat Feb 22, 2014 6:41 am
- Forum: Mitsubishi Discussion
- Topic:
- Replies: -1
- Views:
Re: DIY DMD chip replacement
Ladies and Gentlemen, The DMD chip replacement is actually really easy to do on the Mitsubishi WD-65733 or any other Mitsubishi, Toshiba, or Samsung DLP TV that takes the 4719-001997 dlp chip. I would be a bit weary about buying one from a part recycler as these DMD chips also have a lifetime on the...
- Tue Feb 11, 2014 6:06 am
- Forum: Mitsubishi Discussion
- Topic:
- Replies: -1
- Views:
Re: Mitsubishi WD-60638 colors are red and green
Toodmw, You should see if a friend or neighbor has a mitsubishi TV remote. I believe there are many mitsubishi television remote models that will work on your TV. They all seem to have the same frequency for the menu button - and the numeric keys are all the same. It doesn't necessarily have to be t...
- Wed Feb 05, 2014 7:10 pm
- Forum: Lutema WaveTube Wireless
- Topic:
- Replies: -1
- Views:
Re: San Diego Reader Lutema Bluetooth Speaker
soccermom11, The wavetube wireless bluetooth speaker by Lutema is a great speaker... I use it myself for conference calls, phone calls, as well as music playback. The sound coming out of this little heavy wireless bluetooth speaker is outrageously clear! 1 - To connect your wireless bluetooth speake...
- Wed Feb 05, 2014 7:04 pm
- Forum: Lutema Mid-Sized R/C Helicopter
- Topic:
- Replies: -1
- Views:
Re: Mid sized Chopper!
The price on the mid-sized lutema helicopter is about $55 which is a great deal.. however, you can often get coupons for the the RC helicopters online by going on the Lutema facebook page. I've seen them post discounts on their remote control helicopters as high as 30% on their facebook page. Good l...
- Wed Feb 05, 2014 6:59 pm
- Forum: Mitsubishi Discussion
- Topic:
- Replies: -1
- Views:
Re: Mitsubishi WD-60638 colors are red and green
ok I cnt find my tv remote used my cable box remote to go into the menu and reset in picture menu to factory ? is that the same as 2470 code you are talking about ? looks the same hardly any blue colors they are now red and red color seems to be green as long as peoples faces are green I still dnt ...
- Wed Jan 29, 2014 6:21 am
- Forum: Mitsubishi Discussion
- Topic:
- Replies: -1
- Views:
Re: Mitsubishi WD-60638 colors are red and green
toddmw, Thank you for doing your best to test all inputs on your Mitsubishi WD-60638 DLP TV. Do you know what the replacement lamp part number on your television is? This will help me determine which version TV you have. My guess is that your lamp part number is 915B441001. This lamp usually indicat...
- Tue Jan 28, 2014 7:39 pm
- Forum: Samsung Discussion
- Topic:
- Replies: -1
- Views:
Re: 72" DLP Continuous restarting
I don't know their current return policy because I normally keep a few light bulbs on hand for spare. You would need to contact D-M to ask them about their return policy... Last I remember, there was a small restocking fee that they would charge. You may want to take a look at the color wheel sensor...
- Tue Jan 28, 2014 7:16 pm
- Forum: Samsung Discussion
- Topic:
- Replies: -1
- Views:
Re: 72" DLP Continuous restarting
camarokidz28, What I recommend if you have the BigBoy Samsung HL72A650C1FXZA DLP TV torn apart is that you first check the voltage coming out of the power supply and going into the Ballast board... The voltage should be 320V - 380V. This would mean you have a good working power supply. The power sup...
- Tue Jan 28, 2014 4:56 pm
- Forum: Samsung Discussion
- Topic:
- Replies: -1
- Views:
Re: 72" DLP Continuous restarting
camarokidZ28, Uh oh... The lamp you purchased for your Samsung HL72A650C1FXZA DLP TV, if it was indeed that same link for "Electrified BP96-01600A Replacement Lamp with Housing for Samsung TVs" then I think we should definitely start there. The generic BP96-01600A lamp selling for $34 is probably at...
- Tue Jan 28, 2014 7:09 am
- Forum: Samsung Discussion
- Topic:
- Replies: -1
- Views:
Re: 72" DLP Continuous restarting
camarokidz28, Thank you for posting your issue here. I will do my best to try to assist you with your DLP TV. These Projection Television s normally have a boot sequence, and for me to be able to help you with your DLP TV, I would need to know a few details about your television: 1 - What is the Mak...
- Sat Jan 25, 2014 9:36 pm
- Forum: Mitsubishi Discussion
- Topic:
- Replies: -1
- Views:
Re: WD60735 Screen Issues
gnat1000, Thank you for giving me your lamp code... 915B403A01 lamp is for the first generation WD-60735 Mitsubishi DLP TV's which helps me look up some stuff in the service manual. With regards to the menu, this is exactly why I wanted you to hit the menu. The issue seems to be originating from the...
- Sat Jan 25, 2014 7:26 pm
- Forum: Mitsubishi Discussion
- Topic:
- Replies: -1
- Views:
Re: WD60735 Screen Issues
gnat1000, Thank you for the great explanation... I will do my best to help you out here. I have a few questions with regards to your Mitsubishi WD-60735 Rear Projection Television and it's components.. 1 - What is the lamp part number of your TV set? This helps identify the version and should be wri...
- Sat Jan 25, 2014 7:15 pm
- Forum: Mitsubishi Discussion
- Topic:
- Replies: -1
- Views:
Re: WD-60737 Sound but no picture - New lamp & Ballast
Elisgranny, Thank you for joining our forum. Can you tell me the model number of your Television and the Lamp Part Number? Where did you order the old lamp from and where did you order the new lamp from? The Issue with the ballast wiring is most likely because you bought a generic lamp of lower qual...
- Sat Jan 25, 2014 6:23 am
- Forum: Forum Feedback
- Topic:
- Replies: -1
- Views:
Re: HDTV antennas
JJ, Great question and I think I can help you with what you need. First, you need to find our if your Rear Projection TV has a build-in HD Tuner (also known as an ATSC Over The Air High Definition Tuner). One way to find out is by buying an HDTV antenna and plugging into the RF/coaxial connection on...
- Fri Jan 24, 2014 6:52 am
- Forum: Mitsubishi Discussion
- Topic:
- Replies: -1
- Views:
Re: Mitsubishi WD-60638 colors are red and green
Todd, Good job with all the info.. That lamp part number is helpful and you found it! Your Mitsubishi WD-60638 uses a Mitsubishi 915B441001 Replacement Lamp... Which is what that number is on the sticker. No need for the text off of the color wheel! I just need to the answers to these questions when...
- Fri Jan 24, 2014 5:50 am
- Forum: Samsung Discussion
- Topic:
- Replies: -1
- Views:
Re: Samsung DLP white dots fix?
Reagan,
Good job.. I'm glad you were able to get your Samsung HL-T6156WX DLP Television going again! I'm glad we could help recommend the parts and the replacement lamp to you that work. Hopefully your TV set will keep on truckin' for many years to come.
Good job.. I'm glad you were able to get your Samsung HL-T6156WX DLP Television going again! I'm glad we could help recommend the parts and the replacement lamp to you that work. Hopefully your TV set will keep on truckin' for many years to come.
- Thu Jan 23, 2014 3:24 am
- Forum: Sony LCD Projection Discussion
- Topic:
- Replies: -1
- Views:
Re: Sony KDS-R70XBR2
Nicco, I don't see any reason why anyone would opt-in to a generic lamp for their Sony DLP or LCOS TV... I don't care which model you have, specially people with the KDS-R70XBR2 XBR Series TV's that cost 6k-8k in the market when they were released. Here is a good read about the knock-offs that shoul...
- Thu Jan 23, 2014 3:17 am
- Forum: LG/Zenith Discussion
- Topic: xrllidch
- Replies: 0
- Views: 1631
Re: Zenith E44W46LCD - Changed Bulb, Grn light blinks?
Ladies and Gentlemen, If anyone has this issue, please post with some detail and with a bit more information I think we can resolve the issue. The Zenith E44W46LCD is known to commonly have a weakend power supply or ballast that would cause this issue. I will keep checking on this subject until we g...
- Thu Jan 23, 2014 3:14 am
- Forum: Mitsubishi Discussion
- Topic:
- Replies: -1
- Views:
Re: Mitsubishi WD-60638 colors are red and green
toddmw, Thank you for posting information on your Mitsubishi WD60638 DLP Television set... I have a few questions for you with regards to the issue at hand: 1 - Do the colors also appear off in the Menu System? 2 - Is this color issue happening on all inputs? Please test Digital and Analog (analog b...
- Mon Jan 20, 2014 4:46 pm
- Forum: Sony LCD Projection Discussion
- Topic:
- Replies: -1
- Views:
Re: Sony KDS-R70XBR2
Nicco, No way that you would be able to buy an original XL5300 Philips lamp for your Sony KDS-R70XBR2 under $80 at best if your buying a bare lamp.. That lamp is a 180W/200W 1.0 Philips lamp which crosses into the front projection sector. I would suggest you return the lamp under the Amazon 90-day p...
- Sat Jan 18, 2014 10:33 pm
- Forum: Samsung Discussion
- Topic:
- Replies: -1
- Views:
Re: DLP Wont Turn On
Robbiebobbie, I'm glad we worked it out! Good thing I stopped you from throwing out a nice 61" Samsung DLP Television huh? Also, I just figured out how to attach a file - I can fix Televisions all day, but you tell me to attach a file and it takes me 30 minutes to figure it out. I'm sure you will se...
- Sat Jan 18, 2014 10:15 pm
- Forum: Samsung Discussion
- Topic:
- Replies: -1
- Views:
Re: DLP Wont Turn On
Robbiebobbie, Can you please post a picture of your TV screen on here so I can see what we are working with? I have also attached a copy of the Alignment and Adjustment section of the service manual for a HL-S6187WX ... This applies for a different model including HL-S6187WX/XAA (USA) and HLS6187WX/...
- Sat Jan 18, 2014 9:58 pm
- Forum: Samsung Discussion
- Topic:
- Replies: -1
- Views:
Re: HL-S5687 shutting down.
Bryanteagan,
Great! I'm glad the little hat-trick of mine worked!
If you get a chance leave my buddies at FixYourDLP and DM some good reviews for creating the platform for me to help you out...
Great! I'm glad the little hat-trick of mine worked!
If you get a chance leave my buddies at FixYourDLP and DM some good reviews for creating the platform for me to help you out...
- Sat Jan 18, 2014 5:34 am
- Forum: Samsung Discussion
- Topic:
- Replies: -1
- Views:
Re: DLP Wont Turn On
Robiebobbie, Don't panic! The good news is that the lamp you originally had purchase was causing the lamp powering on issue. I'm wondering if your lamp is installed straight into your television? A bar on the top is normally caused by the lamp not being inserted completely into the television set, o...
- Sat Jan 18, 2014 5:29 am
- Forum: Satellite and Cable Boxes
- Topic:
- Replies: -1
- Views:
Re: AirTV Digital Converter Box
Electropogee, The Lutema AirTV Digital Converter box can connect to your television set using the HDMI port connection. The digital converter box will be used as your "TV Tuner" function when you switch your TV to the HDMI input. The blueray player will connect separately to HDMI input #2 directly t...
- Fri Jan 17, 2014 8:41 pm
- Forum: Mitsubishi Discussion
- Topic:
- Replies: -1
- Views:
Re: Mitsubishi Model WD-73833
PapaMike, I'm glad you found a coupon code that can get you a discount on buying both parts. Based on the information on the light bulb being 100W/300W - I can assure you that the light bulb is a generic replacement lamp. Mitsubishi, Philips, or Discount-Merchant would never sell a lamp with such bi...
- Fri Jan 17, 2014 4:58 am
- Forum: Sony LCD Projection Discussion
- Topic:
- Replies: -1
- Views:
Re: Sony KDS-R70XBR2
Nicco, My first question for you would be: Where did you buy the replacement lamp for your Sony KDSR70XBR2 Television? Before you start to tear apart your KDSR70XBR2 television set, let's make sure the lamp you purchased was and original Philips lamp. The Sony XBR's originally came with a Philips La...
- Fri Jan 17, 2014 4:51 am
- Forum: Projectors
- Topic:
- Replies: -1
- Views:
Re: Projection Screen
JJP, Excuse me just budding in here but I have seen many electric projector screens around schools and offices. It seems like some of them are higher quality than others. I have also seen some screens display brighter picture than others - I believe the material of the screen has a lot to do with th...
- Fri Jan 17, 2014 4:40 am
- Forum: Samsung Discussion
- Topic:
- Replies: -1
- Views:
Re: HL-S5687 shutting down.
Bryanteagan, I believe the correct part number for the board is BP95-00444A... But I'm not sure if that is the part number for the Digital board or Analog board.. You are looking for the digital main board or digital video board. My google searches show BP9500444A being the one for your TV. Hope tha...
- Fri Jan 17, 2014 4:28 am
- Forum: Satellite and Cable Boxes
- Topic:
- Replies: -1
- Views:
Re: AirTV Digital Converter Box
Electropor2gee,
What type of television do you have? What type of blueray player do you?
What brand is the digital converter box?
I'm sure someone here can help you out if you give more information about your devices...
What type of television do you have? What type of blueray player do you?
What brand is the digital converter box?
I'm sure someone here can help you out if you give more information about your devices...
- Thu Jan 16, 2014 11:05 pm
- Forum: Mitsubishi Discussion
- Topic:
- Replies: -1
- Views:
Re: Mitsubishi Model WD-73833
Papa Mike, Thank you for the great description of your issue and previous issues on the your Mitsubishi WD73833 Television set. I think the first place to start would be to test the voltage input to the ballast coming from the power supply. You can do this by using a multimeter on the 2 prong input ...
- Thu Jan 16, 2014 1:37 am
- Forum: Samsung Discussion
- Topic:
- Replies: -1
- Views:
Re: HL-S5687 shutting down.
Bryanteagan, The problem you are describing is most likely a defective/defunct Digital Board. The digital board controls the button set on the television as well as all the digital functions on the TV. When the Digital Board on your Samsung HL-S5687W fails, you normally get intermittent functionalit...
- Wed Jan 15, 2014 5:43 pm
- Forum: Samsung Discussion
- Topic:
- Replies: -1
- Views:
Re: DLP Wont Turn On
Good luck Robbiebobbie92... Please let us know if that resolves the issue. Did you ever check the voltage from the power supply into the ballast? Was it between 320V - 380V? I just want to make sure it's not a power source issue at this point... sometimes the capacitors on the power supply board go ...
- Wed Jan 15, 2014 6:30 am
- Forum: Samsung Discussion
- Topic:
- Replies: -1
- Views:
Re: Samsung DLP white dots fix?
Reagan, First to answer your questions - to differentiate a genuine Philips lamp from a generic or counterfeit Philips lamp you can look here: http://www.lighting.philips.com/main/application_areas/projection/brochure/IP_Brochure/ It's a great explanation on how to tell a genuine lamp from counterfe...
- Wed Jan 15, 2014 6:13 am
- Forum: Samsung Discussion
- Topic:
- Replies: -1
- Views:
Re: HL-S5687 shutting down.
Bryanteagan, I have a hunch on what the issue with your television, but the model number is not showing up.. Is the TV a HLS5687WX/XAA or HL-S6187W/XAA or something to that extent? I need the exact model number so I can look at the service manual to help you better. Also, what is your lamp code? Did...
- Wed Jan 15, 2014 5:58 am
- Forum: Samsung Discussion
- Topic:
- Replies: -1
- Views:
Re: DLP Wont Turn On
Robbiebobbie, Great video... Nice HLS6168WX/XAA television and I want to see that puppy up and running. I just saw the video and it does seem like the issue is the lamp... All systems seem to be functional and the DMD Board is sending the signal to the ballast to fire the lamp. The ballast is new an...
- Tue Jan 14, 2014 11:42 pm
- Forum: Samsung Discussion
- Topic:
- Replies: -1
- Views:
Re: Samsung DLP white dots fix?
Reagan, Thank you for the model information! The HL-T6156W and HL-T6156WX are essentially the same thing. The /XAA at the end of the model means that Samsung sold that DLP Television into the USA Market (Americas). The BP9601472A (P) also is the correct corresponding lamp code for your Samsung's rep...
- Tue Jan 14, 2014 11:01 pm
- Forum: Samsung Discussion
- Topic:
- Replies: -1
- Views:
Re: Samsung DLP white dots fix?
Reagan,
Can you please post the model of your Samsung DLP Television? Also, if you can post the Lamp Code of the TV (Or the Samsung Part Number) that your TV uses it would help.
I look forward to your response.
Can you please post the model of your Samsung DLP Television? Also, if you can post the Lamp Code of the TV (Or the Samsung Part Number) that your TV uses it would help.
I look forward to your response.
- Fri Jan 10, 2014 2:51 am
- Forum: Samsung Discussion
- Topic:
- Replies: -1
- Views:
Re: DLP Wont Turn On
Robbie, The issue is most likely either the lamp or the ballast. In rare cases, the issue can also be the power supply or colorwheel. To test - Use your multimeter on the ballast as described in the post here (same link as before - in case people get lost): http://www.fixyourdlp.com/forum/viewtopic....
- Wed Jan 08, 2014 3:23 am
- Forum: Samsung Discussion
- Topic:
- Replies: -1
- Views:
Re: DLP Wont Turn On
robbiebobbie, The ballast for your television is made by Philips Lighting - just make sure it says Philips on there. The part number BP47-00037A will usually not be on the ballast, you will most likely see 9137 008 20605 (The Philips part number) followed by EUC 132d P/41... I haven't seen any count...
- Wed Jan 08, 2014 1:09 am
- Forum: Samsung Discussion
- Topic:
- Replies: -1
- Views:
Re: DLP Wont Turn On
Robbiebobbie, As greyfox mentioned above, please make sure you genuinely have a Philips brand lamp inside - I recommend buying from an authorized distributor like Discount-Merchant to insure that. The market has gotten so saturated with generics and counterfeits (bearing a Philips or Samsung name/bo...
- Fri Aug 31, 2012 11:54 pm
- Forum: Samsung Discussion
- Topic:
- Replies: -1
- Views:
Re: Samsung DLP Chip 4719-001997
You guys can also find instructions on how to install the Samsung/Mitsubishi/Toshiba 4719-001997 DMD chip here:
http://www.fixyourdlp.com/2012/08/06/ho ... 0638-rptv/
Great resource!
http://www.fixyourdlp.com/2012/08/06/ho ... 0638-rptv/
Great resource!
- Sat May 19, 2012 6:38 am
- Forum: Samsung Discussion
- Topic: yusarhhjw
- Replies: 0
- Views: 11244
Re: Samsung DLP Help!
AT1984, I'm sorry for the late reply. I lost the bookmark on this thread and just recently found it. The problem you are describing seems to be a DMD issue. The DMD chip should be easily replaceable to get that sucker going again. Here is a good blog about the DMD chip: http://www.fixyourdlp.com/201...
- Sat May 19, 2012 6:35 am
- Forum: Samsung Discussion
- Topic: yusarhhjw
- Replies: 0
- Views: 11244
Re: Samsung DLP Help!
Grimace, The issue you are describing may be a matter of just reseting to factory defaults in the service menu of the TV. The HL-S6167WX has a service menu that you can get into if the set is turning on. Fixyourdlp.com should have the code for the service menu. If the TV set is not turning on, you m...