Search found 17 matches

by preludedez
Sat Jul 14, 2012 6:11 pm
Forum: Plasma Televisions
Topic:
Replies: -1
Views:

vizio vp42 hdtv standby light on but cant turn on

Ok, I have had this set apart a few times due to distractions. I checked fuses all are good. I don't see any burnt parts nor bad caps visually. Anyone else run into this issue?
by preludedez
Sat Jun 11, 2011 4:09 pm
Forum: Forum Feedback
Topic:
Replies: -1
Views:

Toshiba Regza 32RV530U

I have a Toshiba 32RV530U that when you plug it in, the amber light just blinks then the power cuts off the entire tv. I do not get any picture just the blinking of the amber light. Can anyone lead me in the direction of this repair? Thank you
by preludedez
Thu Oct 22, 2009 12:28 am
Forum: LCD Televisions
Topic: dxuckscp
Replies: 0
Views: 480

lg du-37lz30 power light blinks red and green

Okay, so I got this tv from a guy at work that wanted me to take a look at it to see if i can repair it for him. I plugged it in and the power indicator light strobes from red to green. It will not do anything pass that point. I opened up the tv and notice it was a little dusty but didnt notice anyt...
by preludedez
Fri Aug 28, 2009 12:33 am
Forum: LCD Televisions
Topic: luftbixpxx
Replies: 0
Views: 563

Polariod flm-2601

I have replaced c 939 c940 c909 c928 and c932 along with the sllow blow fuse and still nothing. Has anyone else worked on this power supply thanks
by preludedez
Fri Aug 28, 2009 12:28 am
Forum: LCD Televisions
Topic: xixcufgs
Replies: 0
Views: 881

Re: Samsung LCD TV LT-P326W help

ok i was sent a picture of the board and what to check thanks jake
by preludedez
Sat Aug 22, 2009 3:04 am
Forum: LCD Televisions
Topic: rliwazyra
Replies: 0
Views: 993

Samsung lt-p325w Getting bad picture

I am having an issue with my 32" lcd tv which is a Samsung lt-p326w. I will include the photos I have so that you can have an Idea as to point me in what direction I should go. Hope the img help thanks
by preludedez
Sun Aug 16, 2009 12:17 am
Forum: LCD Televisions
Topic: xixcufgs
Replies: 0
Views: 881

Samsung LCD TV LT-P326W help

I have gotten the tv opened up. for green picture said to check plug from PSU on thesignal board. is this the board on the left side after it is opened up? I also got the color streaking on picture which is more what i think is going on but I can not seem to be able to pin point the ICM1 and ICM2. T...
by preludedez
Sun Aug 16, 2009 12:03 am
Forum: Samsung Discussion
Topic: yolviwbh
Replies: 0
Views: 796

Re: samsung lt-p326w no sound

Hey sorry I am taking so long to get back. I thank you for the advice. I did get sound to work iam not sure why it didnt to begin with. It was odd. Well, now the problem I am having is I am getting that shadow look. Intermently streaking of the color and pictures. Any idea what could cause this? I g...
by preludedez
Wed Jul 01, 2009 3:36 am
Forum: Samsung Discussion
Topic: yolviwbh
Replies: 0
Views: 796

samsung lt-p326w no sound

Ok, I have gotten yet another awesome lcd tv but it has no sound. I hooked up my ps3 to it and you can hear the speakers just hum but nothing coming out of the system. the fuzz when you have the blue screen off cant hear that either even you its turned up to 80. Anyway to fix this? I am thinking its...
by preludedez
Thu Jun 11, 2009 3:42 am
Forum: Sony LCD Projection Discussion
Topic: knaxwijr
Replies: 0
Views: 778

Re: Sony KDF-E42A10 power issue

Think you can post a picture of what's going on? I would if I could get it to turn on again. The lat time which was sunday that I turned it on, it just had snow look letters looked backwords it was wierd. First time it did that that i have seen. I still cant press any buttons when it is on. it wont...
by preludedez
Mon Jun 08, 2009 12:17 am
Forum: Sony LCD Projection Discussion
Topic: knaxwijr
Replies: 0
Views: 778

Sony KDF-E42A10 power issue

Ok here is what I am experincing. I turn the tv power on with nothing on the screen. I have the back cover off to look at what is is doing. I am getting both fans turn on. I get one click on the right side looking at the set from behind. I then get a 2nd click which then turns on a red led light nec...
by preludedez
Fri Mar 20, 2009 1:00 am
Forum: Samsung Discussion
Topic: yusarhhjw
Replies: 0
Views: 11519

Re: Samsung DLP Help!

ovadoggvo

Hello again. I wanted to ask if the part for the HLN437W digital board is the same for HL-N5067W? I dont seem to get one on the merchant site for mine. Thanks
by preludedez
Tue Mar 17, 2009 11:28 pm
Forum: Samsung Discussion
Topic: yusarhhjw
Replies: 0
Views: 11519

Re: Samsung DLP Help!

Ovadoggvo

Again, I thank you for you help. i am going to order that board right from the site that you recomend. Its the lowest cost to repair lol. I will oreder this weekend and will keep you all posted on what happened.
by preludedez
Tue Mar 17, 2009 1:04 am
Forum: Samsung Discussion
Topic: yusarhhjw
Replies: 0
Views: 11519

Re: Samsung DLP Help!

ovadoggvo Thanks for the input on that. The reason I did the power switch on the strip was because none of the buttons were doing anything. I tried to press power channel vol menu tv and nothing would happen. Is the board with the coax you are talking about the one to the left as you pull the board ...
by preludedez
Tue Mar 17, 2009 12:58 am
Forum: Plasma Televisions
Topic: tkvdvkum
Replies: 0
Views: 1330

Re: Dell W4200 HD PLASMA

Ok I will give them a shot. thanks. I am new to the repairing thing so what is the SMD
by preludedez
Mon Mar 16, 2009 1:31 am
Forum: Samsung Discussion
Topic: yusarhhjw
Replies: 0
Views: 11519

Re: Samsung DLP Help!

Samsung HLN437W. The problem I am having with this TV are a few. It is my sons tv and after a few days of having the tv working he began getting like fuzz lines on the screen when using HD. The cable is a bit fuzzy but enough to not bother you. Well, the other day we could not turn the tv on. It sat...
by preludedez
Mon Mar 16, 2009 1:20 am
Forum: Plasma Televisions
Topic: tkvdvkum
Replies: 0
Views: 1330

Dell W4200 HD PLASMA

I have a dell w4200hd tv that is not turning on. I get the blue light after I power on, the ballast cycles a loud click, but then I get a red light on the board. I have replaced 2 caps that rea 250v 1000uf 105c. They were bulged out so I figured that was the problem. That didnt work. Can you help me...

Go to advanced search