kvclhvfgkp

Moderator: Angel

Post Reply
irvr
Contributor
Contributor
Posts: 3
Joined: Fri Nov 20, 2009 12:08 am

Samsung HLN617WX/Xaa will not power on

Post by irvr » Fri Nov 20, 2009 12:32 am

I bought a used unit from a very nice lady who told me she had recently had the color wheel replace on this set. At the time of the repair, the service man told her she would soon need a lamp. So, it turns out, she is moving and the lamp went out (picture got dim, then gone, but she claims to have had sound). She sold me the set because there would be no room for it in her new location. Brought it home, ordered a new bulb (Philips), replaced the bulb, no problem. Plugged in the set, pressed the power on button and....nothing! Not a sound of any kind. No clicks, pops, whistles, etc! There are no LEDs lit on the front panel. If I look into the back of the set, there is a bright green LED lit approximately in the center, about 1/3 of the way up from the bottom. This light stays on as long as the set is plugged in. The power on/off button does nothing.

Anyone have any thoughts? I don't think I am doing anything wrong. The lamp cover is on securely.

Thanks, IrvR.

AlanfUp
TV Wizard
TV Wizard
Posts: 3471
Joined: Sat Apr 11, 2020 4:53 am

kvclhvfgkp

Post by AlanfUp » Thu Dec 22, 2022 7:32 pm


Post Reply

Return to “Akai DLP Discussion”