eurfkbnaiq

Moderator: Angel

Post Reply
dqboy
Contributor
Contributor
Posts: 6
Joined: Fri Sep 11, 2009 7:25 pm

No lamp power *#@!!! Volts going in!

Post by dqboy » Sat Sep 12, 2009 12:00 am

I have no power to my new lamp; my ballast has several hundred volts going in the Blue/Brown wires. Is this a bad ballast or a control problem? :?:

Jake
Tech Junkie
Tech Junkie
Posts: 114
Joined: Thu Mar 12, 2009 11:57 pm
Location: Tijuana, Mexico AJUAAAAAAAA!

Re: No lamp power *#@!!! Volts going in!

Post by Jake » Tue Sep 22, 2009 3:23 pm

power supply

Your ballast should be receiving around 340-360 volts.

Try changing the power supply, if this doesn't work, then try changing the ballast.
Jakey!

CarlfUp
TV Wizard
TV Wizard
Posts: 440
Joined: Fri Apr 24, 2020 6:09 pm

eurfkbnaiq

Post by CarlfUp » Fri Dec 09, 2022 7:37 pm


Post Reply

Return to “Akai DLP Discussion”