toinwrvi

Moderator: Angel

Post Reply
joeboo33
Newbie
Newbie
Posts: 2
Joined: Fri Nov 19, 2010 1:17 am

Samsung DLP HLR4667W - Help Please!!!!

Post by joeboo33 » Fri Nov 19, 2010 1:29 am

The color wheel went on my TV. It was obvious from the loud noise and when I opened it up I saw it was cracked. I replaced the color wheel with instuctions from the internet. Now my tv isnt working correctly. Its powering on but the lamp is not igniteing. It tries a bunch of times and then stops and the 3 lights in the front stay on. A new lamp is on the way but I find it hard to believe the color wheel and lamp went at the same time. Could it be something I did during instalation of the color wheel? I plugged the cable wire into the tv hoping I could hear sound without the picture. Is that a good way to tell if the lamp is bad? Please help. I didnt install the new lamp yet but my fear is that I will and it still wont work. Does anyone have any other ideas? Any help would be great.

User avatar
rougeleader
Self-Proclaimed Guru
Self-Proclaimed Guru
Posts: 38
Joined: Thu Nov 18, 2010 9:47 pm

Re: Samsung DLP HLR4667W - Help Please!!!!

Post by rougeleader » Fri Nov 19, 2010 11:53 pm

hi, welcome!
id recommend you go over you installation one more time and put close attention to your connections, you would be surprised how the obvious things get overlooked! how old was that previous lamp you had? if it was over 3 years old it is highly likely that the lamp did go also!

joeboo33
Newbie
Newbie
Posts: 2
Joined: Fri Nov 19, 2010 1:17 am

Re: Samsung DLP HLR4667W - Help Please!!!!

Post by joeboo33 » Sat Nov 20, 2010 12:33 am

Thanks!!! I went over it several times. Its actually 5 years old. I hope thats it.

MiafUp
TV Wizard
TV Wizard
Posts: 489
Joined: Thu Apr 23, 2020 10:53 pm

toinwrvi

Post by MiafUp » Fri Mar 17, 2023 1:31 pm


Post Reply

Return to “Akai DLP Discussion”