Page 1 of 1
BIG Problems with WD-52725
Posted: Fri Jan 29, 2010 3:32 am
by Crocluvr92
I just bought this TV from an online auction and the Red Light for Bulb came on after I plugged it in. I Just replaced the bulb and got the red light again after the TV started up, then just today, I replaced the ballast and I plugged in the TV and as with the other times the green light blinked for the reset, I turned on the TV and the light stayed green for about a minute then switched back to the red light again! Im getting VERY tired of this. Any suggestions?
Re: BIG Problems with WD-52725
Posted: Fri Jan 29, 2010 8:51 am
by admin
Those TVs usually have a sequence of lights. We have a guide on the main site to read how the lights work. For example, status blinking red means it could be the fan. If the lamp LED is blinking, could be a combination of either lamp, ballast, or power supply. Even a color wheel. Just gotta give more symptoms.
Re: BIG Problems with WD-52725
Posted: Wed Feb 10, 2010 1:03 am
by ovadoggvo
When you installed the ballast, did you check your color wheel?
Are you sure you have your lamp cover completely and securely fastened? There is a sensor there ya know!
nadmhooe
Posted: Thu Jan 19, 2023 4:22 am
by Wimlok