qjhmtstb
Moderator: Angel
-
cardsjason
- Newbie
- Posts: 1
- Joined: Fri Mar 26, 2010 2:07 am
need help getting lamp panel off HLR4677W DLP
There was a single screw on the exterior part of the tv. Took that out and still can't seem to get the panel open. Feels like I'm going to break it so I quit messing with it. Help me please.
-
ChubbsTech
- TV Wizard
- Posts: 404
- Joined: Thu Feb 18, 2010 12:53 am
- Location: Santa Ana Ca.
Re: need help getting lamp panel off HLR4677W DLP
Hello cardsjason.
I got a hold of a Samsung HLR5067W TV in my shop early in the week, it’s virtually the same to the one you got (it’s slightly bigger).
If you only want to take the enclosure out the I suggest you watch the following video & pic.
http://www.youtube.com/watch?v=YVO7xaez91s
If that still dosent hel here are some photos of where the screws are located so you can remove the back of the TV.
Good luck.
I got a hold of a Samsung HLR5067W TV in my shop early in the week, it’s virtually the same to the one you got (it’s slightly bigger).
If you only want to take the enclosure out the I suggest you watch the following video & pic.
- ASC02167.JPG (45.57 KiB) Viewed 1253 times
If that still dosent hel here are some photos of where the screws are located so you can remove the back of the TV.
- ASC02174.JPG (39.01 KiB) Viewed 1253 times
- DSC02166.JPG (36.55 KiB) Viewed 1253 times
Remember Knowing Is Half The Battle !