FixYourDLP.com Forums

I just recently replaced my color wheel and tv works perfectly. I do not have any picture issues that I know of. The set quit turning itself off after wheel replacement. I noticed the temp light staying on in standby mode, what could be wrong? I did not do any resetting after color wheel replacement and the light was on then.

Thanks

Hello mitchaa.
Since the tv is not shutting off, and all you get is a temp light in standby mode. There is a strong possibility that you might have moved a temperature sensor, or some thing near the color wheel. Double check inside, make sure that every thing is completely connected, so you can eliminate the possibility of a loose connector causing the problem.
Good luck.

I went back into the tv with no luck. I double checked each connector and problem still exists. The tv is working perfectly. Thanks for your help.