FixYourDLP.com Forums

Howdy!

i recently tried to replace my color wheel. That part went just fine, but I destroyed a connector on one of the cables. It is the cable that goes from the light board to the vertical board next to the optics. The cable is a 5 wire ribbon with 1 black and 4 white wires. It is cased with tubing and has an EM trap. I have included a picture of the cable and the location of the cable. If anyone knows the cable part number and where I could get one, or the connector part number that would be wonderful!!

the cable should have a part number if it does not, You may have to call the manufacturer for the part number on this wire.

Hello helpme987.
You can either try soldering it your self (not very recommendable unless you have experience with electronics) or you can order a set of cables here: http://www.discount-merchant.com/Search ... 3W%20cable that I think is what you’re really looking for.
Good luck.