Samsung DLP Lamp Reset / Lamp Life Question
Posted: Thu Dec 16, 2010 12:48 pm
Hi everyone. First timer here, so thanks in advance. I have a Samsung HLS7178 DLP set. The TV suddenly began to shut off after being on briefly. I had the 3 front lights blinking so after researching I assumed I had a lamp problem (the set is 4 years old). I purchased a new lamp on line and was able to install it easily. After installation the set continued to shut down. Based on what I have read here I went into the factory service mode. As directed by other posts, after entering the factory service mode I went into the option menu. At the entry "lamp clear" I hit enter. I exited the service made and waited 5 minutes. This worked and now the TV works fine (at least for 2 hours!!). Here's my questions (finally!): Next to the lamp clear option their is also a line item which says: "lamp life". It now reads 4785 hours. Is this a value that needs to be reset as well? I do not see any way to reset this! I believe this mean the set (4 years old) has been on and used for 4785 hours? I don't think it means that is how much time is left on the new bulb, but I am not sure! Should I reset or since everything is working fine do I just leave it alone? If I reset do I set it to "0". Thanks in advance!!!