Page 1 of 1
WD65734 with red Status Light
Posted: Mon Jan 03, 2011 4:18 pm
by us244881
My Wd65734 DLP box will not power up or respond to system reset. In either case as i try to power the unit up I end up with a steady red status light on the front panel. Info on the web is confusing. I cannot determine if I have a lamp problem or a more serious issue with the power supply or other circuit board. Can anyone decypher these symptoms for me? Thanks
Re: WD65734 with red Status Light
Posted: Wed Jan 05, 2011 3:05 am
by us244881
Followup: Today I learned how to get error codes, and this unit is displaying a error code 48, which evidently indicates a problem with the PWB Main board. Is this one that has capacitor issues or is this one I just replace the whole board?
Re: WD65734 with red Status Light
Posted: Thu Jan 06, 2011 1:54 pm
by us244881
Anyone out there?????????? I have pulled the circuit board chassis out of this thing and visually inspected the primary power card and the Main circuitboard. No visible issues with swelling capacitors or blown fuses. My question now is, based solely on the error 48 code, what is the confidence level that installing anew PWB-Main is going to correct my issue. I welcome any feedback. Thanks
Re: WD65734 with red Status Light
Posted: Thu Jan 20, 2011 12:26 am
by SrMerlyn
Have you ever replaced the lamp? If you have never replaced the lamp I would try that first. That is the easiest way to troubleshoot the TV, and worst case scenerio, you have a spare lamp if the new one doesn't fix the problem. Where did you learn about the error codes? Was it directly from the service manual?
rdzoyiruyc
Posted: Fri Mar 24, 2023 11:41 am
by AlanfUp