rilgbxxd
Moderator: Angel
-
- Contributor
- Posts: 3
- Joined: Thu Jan 13, 2011 10:50 pm
glow from ballast board - lamp wont fire up.
There is a glow from ballast board when tv is turned on. The tv previously worked good, now the lamp wont light up...but i can see the flash in the bulb like its trying to light up (3 times) and when it does that i see the ballast glow 3 times. Is the ballast supposed to do that? Could it just need a new lamp? This is a HL-R4667W model.
- rougeleader
- Self-Proclaimed Guru
- Posts: 38
- Joined: Thu Nov 18, 2010 9:47 pm
Re: glow from ballast board - lamp wont fire up.
well, when you say a glow, do you mean like a LED light or more like a red hot glow???
if you could get pictures of the issue or maybe post a video on youtube, that would help a lot!!!
if you could get pictures of the issue or maybe post a video on youtube, that would help a lot!!!
-
- Contributor
- Posts: 3
- Joined: Thu Jan 13, 2011 10:50 pm
Re: glow from ballast board - lamp wont fire up.
The "glow" occurs at the same time lamp is striking arc. It does it along with the arc being struck 3 times and shuts down with the 3 warnings on the front (the safety switch is taped in the down position while i was taking the pictures). I have read its supposed to glow during lamp start-up. Bulb is the original Osram about 4 years old. Is the glow normal? Can i replace the square Osram bulb with a square Phillips bulb or will it need a different ballast? I included a picture,but its rather small...i have a much better shot but it was too large to be uploaded here.
- Attachments
-
- glow occurs at the same time lamp is striking arc.
- P1000701.JPG (121.85 KiB) Viewed 2256 times
-
- Contributor
- Posts: 3
- Joined: Thu Jan 13, 2011 10:50 pm
Re: glow from ballast board - lamp wont fire up.
Ok...thanks anyway. Im going to replace the lamp in it only, and hope its the problem as nobody seems to know what the "glow" is coming from the ballast board.