How To Install A Sony XL-5100 Lamp.
Posted: Fri Mar 13, 2009 4:37 pm
stuart
Submitted on 2009/01/04 at 3:47pm
It’s not that big of a deal. Every 3 years you need to install a bulb. It’s an esy DIY job.
It takes one phillips screw to open the bulb compartment on the right side of the set,..then pull the handle to remove the cartridge. At this point you can install a new cartridge,..or dissasemble the cartridge (one philips screw and one small nut) and install the new builb. I did mine in about 10 minutes with a Phillips screwdriver and a pair of household pliars. So your costs over 15 years (4 replacements after using up the orrigional) would be $440,..not 3 grand. In the world of super high-end TV’s,…that’s cheap.
Here’s a place that sells the bulb alone for $135,…or the bulb already installed in a rebuilt OEM housing for $155. At $155 it makes it a 2 minute swap,..with only one phillips screw to remove and replace. ( and $155 x 4 replacements is still $620 over the last 12 years of the TV’s life). Seriously,..if you can clean your dryers’ lint screen,..you can change this bulb.
Submitted on 2009/01/04 at 3:47pm
It’s not that big of a deal. Every 3 years you need to install a bulb. It’s an esy DIY job.
It takes one phillips screw to open the bulb compartment on the right side of the set,..then pull the handle to remove the cartridge. At this point you can install a new cartridge,..or dissasemble the cartridge (one philips screw and one small nut) and install the new builb. I did mine in about 10 minutes with a Phillips screwdriver and a pair of household pliars. So your costs over 15 years (4 replacements after using up the orrigional) would be $440,..not 3 grand. In the world of super high-end TV’s,…that’s cheap.
Here’s a place that sells the bulb alone for $135,…or the bulb already installed in a rebuilt OEM housing for $155. At $155 it makes it a 2 minute swap,..with only one phillips screw to remove and replace. ( and $155 x 4 replacements is still $620 over the last 12 years of the TV’s life). Seriously,..if you can clean your dryers’ lint screen,..you can change this bulb.