pvncnhtwwy

Moderator: Angel

Post Reply
ilo313
Contributor
Contributor
Posts: 4
Joined: Thu Dec 10, 2009 6:33 am

hls5086w

Post by ilo313 » Thu Dec 10, 2009 7:09 am

I just replaced my color wheel on my hsl5086w because i had the colors on my screen fading in and out..problem remained the same after i replaced the wheel.i ran the two tests in the main menu after i replaced my wheel and the color is still fading.i also replaced the lamp 2 months ago.
any help would be great

Jason1976
TV Repair Ninja
TV Repair Ninja
Posts: 286
Joined: Sat Aug 15, 2009 6:34 pm
Location: Harrisburg PA

Re: hls5086w

Post by Jason1976 » Mon Dec 14, 2009 1:26 pm

it could be in the digital board or the dmd board.

ilo313
Contributor
Contributor
Posts: 4
Joined: Thu Dec 10, 2009 6:33 am

Re: hls5086w

Post by ilo313 » Thu Dec 17, 2009 5:37 am

thanks jason. whats the best way to find out which is the problem..
another problem i just ran into is i was trying to see if there was anything wrong or broken in the back of the t.v..so i removed the board that holds the color wheel and etc..when i put everything back together i turned on my tv and the picture is 2inches higher now.any help on this issue will be great

Jason1976
TV Repair Ninja
TV Repair Ninja
Posts: 286
Joined: Sat Aug 15, 2009 6:34 pm
Location: Harrisburg PA

Re: hls5086w

Post by Jason1976 » Fri Dec 18, 2009 4:57 pm

it's not alined now. you have to loosen it back up and use a mirror to try and aline it if you see a black bar. if you do not see a black bar then with the tv off press mute 1 8 2 power. and you can ajust the screen . you can move it up and down or side to side.


Post Reply

Return to “Akai DLP Discussion”