Page 1 of 1
color wheel
Posted: Tue Jan 12, 2010 2:33 am
by pmc7855
ok, seems that the color wheel must spin before the ballast lights the lamp. well i dont hear it spin and after a few tries i pulled the lamp and the wheel was still in the same position. now do i replace the color wheel or might what feeds power to the wheel be defective? once i hear the wheel spin everything works fine, but then the picture was showing like a negative after a few minutes.
Re: color wheel
Posted: Wed Jan 13, 2010 1:55 pm
by Jason1976
color wheel is more likely to fail since it's a moving part.
Re: color wheel
Posted: Sat Jan 16, 2010 2:04 pm
by Moofus12
I have the same problem (it seems to be very common if you read all of the posts). I replaced my color wheel - it was making a lot of noise - and the TV worked fine for 4-5 weeks. Now the lamp won't start. I am not suspecting the color wheel, since it is new. I have also replaced the ballast and lamp with no effect.
ipfwlllt
Posted: Sat Dec 31, 2022 9:14 pm
by JackfUp