mbhnsaob

Moderator: Angel

Post Reply
lcbc4u
Contributor
Contributor
Posts: 3
Joined: Mon May 25, 2009 7:08 pm

lamp

Post by lcbc4u » Mon May 25, 2009 7:13 pm

reieved a 120/132 watt instead of 100/120watt will that make lamp tv not cut on?
Top
Jake
Tech Junkie
Tech Junkie
Posts: 114
Joined: Thu Mar 12, 2009 11:57 pm
Location: Tijuana, Mexico AJUAAAAAAAA!

Re: lamp

Post by Jake » Tue May 26, 2009 2:13 pm

It all depends on the wattage of your ballast.

If you have a 100W ballast with a 120W lamp...your ballast will be short for 20W to ignite the lamp.
Basically it would not work...and if it does is not going to work properly
Jakey!
Top
User avatar
Eddie
Moderator
Moderator
Posts: 221
Joined: Thu Mar 12, 2009 8:58 pm
Contact:
Contact Eddie

Re: lamp

Post by Eddie » Sat Aug 01, 2009 7:31 pm

That's not true Jake.. a 120W lamp is 100/120W meaning that the 100W ballast will work fine. A 132W lamp will also work, but may appear dimmer since it needs a lot more energy.
--
Eddie
Top
SuefUp
TV Wizard
TV Wizard
Posts: 5129
Joined: Mon Apr 27, 2020 9:41 pm

mbhnsaob

Post by SuefUp » Sun Nov 13, 2022 4:38 am

celebrex capsule 100mg
Top
Post Reply

Return to “Akai DLP Discussion”