in 16x9 mode the upper rt corner to the lower rt corner the picture is missing almost like its bending in. on top rt its about 1/2 inch wide and fades out 6 inches from lower rt and then the picture is normal.
in 4x3 mode both top upper corners bend in slightly for about 5 inches.
on an analog set i could adjust a problem like this. tv's being digital i think i have an expensive problem.
any ideas??
atxmuxnh
Moderator: Angel
-
Jake
- Tech Junkie
- Posts: 114
- Joined: Thu Mar 12, 2009 11:57 pm
- Location: Tijuana, Mexico AJUAAAAAAAA!
Re: samsung HLS 5687w missing small strip of picture
i think is the digital video board
Not 100% sure....but it sound like it.
check on DM .___. maybe you can find there the board that you need. ._.
Not 100% sure....but it sound like it.
check on DM .___. maybe you can find there the board that you need. ._.
Jakey!
