scukfjlsp
Moderator: Angel
-
- Contributor
- Posts: 5
- Joined: Tue Mar 17, 2009 12:53 am
using a generic lamp in my dlp?
The're a lot cheaper and I'm not sure how long I'm going to keep the set. what's the official word on the Chinese brands?
Re: using a generic lamp in my dlp?
I don't ever recommend using generic brands.
Say you buy a generic for 70 bucks. It lasts 6 months to a year--that is going to cost you another 70 bucks for another lamp.
A Philips lamp will last you 2-3 years and you spend about $40 more. So it's about $110 for 2-3 years (or more) or $140 for 2 years max. No brainer.
Say you buy a generic for 70 bucks. It lasts 6 months to a year--that is going to cost you another 70 bucks for another lamp.
A Philips lamp will last you 2-3 years and you spend about $40 more. So it's about $110 for 2-3 years (or more) or $140 for 2 years max. No brainer.
TNTExplosives wrote:The're a lot cheaper and I'm not sure how long I'm going to keep the set. what's the official word on the Chinese brands?
--
Eddie
Eddie
-
- Contributor
- Posts: 11
- Joined: Thu Mar 19, 2009 10:21 pm
Re: using a generic lamp in my dlp?
Doesn't using generic parts void your warranty too? I thought I saw that somewhere.
Re: using a generic lamp in my dlp?
Philips lamps are the best!
they've worked pretty good for me i really recommend them!!
don't even think twice of buying a Philips
they've worked pretty good for me i really recommend them!!
don't even think twice of buying a Philips
Re: using a generic lamp in my dlp?
I think what ruby means is don't think twice about not purchasing the correct product for your television. Most TVs use Philips lamps as the OEM, so you'd be a fool to buy the generic products.
--
Eddie
Eddie
Re: using a generic lamp in my dlp?
Okay, then tell me this! My SXRD was still under warranty in Jan 2009, I purchased the set in Feb 2006. That stock lamp lasted right at 3 years. Under my extended warranty I had them come and replace lamp and clean out the cobwebs...that was last January..last night the new lamp popped. What is that, eight months! I pulled out the lamp and got a gander at it. It was a Philips, but I also noticed they put in a 100 watt lamp. I looked up the specs on Sony's site and it should have been a 120 watt! This February will be 4 years I have had this tv. Two years into it I got the dreaded yellow stain...they fixed that and not had a problem since. I did notice after they changed my lamp, in the lower right corner of the screen, when there is a white background, a small (maybe 2 or 4 inches) dark spot...you can only see it if the whole screen is light so you hardly ever notice it. But now I am wondering if that lower rated lamp could have been the cause of that! I didn't know they made a lower watt lamp that would fit this tv (kdsr50xbr1 sxrd)...and that just burns me up! And the thing is, it was a philips bulb that shouldn't have more then 3000 hours on it!! The philips 120 watt is rated for 6000 plus (and I proved that by my first lamp at 9500 hours)...so, I don't take much stock in the comment that you should be putting in a philips! of course, them putting in a lower rated lamp "might" have helped it along but I just don't think so.....
Just remember....there is "Original OEM" and "OEM Compatable".... the latter passing less stringent standards (not by the original manufacturer) for "affordability"!!
Just remember....there is "Original OEM" and "OEM Compatable".... the latter passing less stringent standards (not by the original manufacturer) for "affordability"!!
Re: using a generic lamp in my dlp?
You've got to be careful for those warranty techs.
This isn't a slight to techs out there, but some techs will grab whatever lamp that will work. A Sony TV should not use a 100w lamp. It needs 120w P22h typically. And if you check with Philips, those run 100/120w. You can check the date code on the lamp to make sure they aren't selling you a used or out-of-date stock lamp too, which sounds like something they may have done.
I'm pretty sure Philips doesn't make the plain 100w lamp anymore. Most of their lamps, especially for larger television manufactures are the dual wattage like 100/120, 120/132, 132/150, 150/180. The only one they probably still do 100w is the P23h, a larger lamp for older projection television sets.
This isn't a slight to techs out there, but some techs will grab whatever lamp that will work. A Sony TV should not use a 100w lamp. It needs 120w P22h typically. And if you check with Philips, those run 100/120w. You can check the date code on the lamp to make sure they aren't selling you a used or out-of-date stock lamp too, which sounds like something they may have done.
I'm pretty sure Philips doesn't make the plain 100w lamp anymore. Most of their lamps, especially for larger television manufactures are the dual wattage like 100/120, 120/132, 132/150, 150/180. The only one they probably still do 100w is the P23h, a larger lamp for older projection television sets.
--
Eddie
Eddie
-
- Contributor
- Posts: 17
- Joined: Fri Feb 19, 2010 5:58 am
Re: using a generic lamp in my dlp?
Man I tell you Eddie is so right on never use anything but factory or you can use OSRAM which is made by Philips. and really if you think of it for another $15.00 t0 $20.00 its really not much more. Sort story, bought 2 2077 model Toshiba 62" DLP units. 1 worked the other the bulb I believed was out. I ordered cheap it came with housing and first thing I noticed bulb was completely different looking. I installed it and it never lite up at all I even swapped out the other bulb and still no workie. I repackaged the bulb the company took back no problem, Hmmm, having problems me thinks ordered my factory from a guy that happened 2 have what I needed with housing for around $35.00 to $45.00 more but I tellya it worked great my customers where happy I was happy and I even bought a 2007 Toshiba 62" for my self till a customer saw mine and bought that from me now its a 61" Samsung that just got a new factory bulb, I like. So stay with factory, no problems and no one comes back on you for bulb problems.
Re: using a generic lamp in my dlp?
Guys,
I just read the posts about OEM vs Generic and I have no problem spending a few more bucks for the Phillips lamp. I just pulled out the lamp from my LG DLP and its a OSRAM lamp.
I found the lamp for $107. on a web site. My TV is about 5 years old, what if it needs a ballast too. Im spending a lot of money on a TV thats about to see the end of its days.
Do you think I should just call is quits on this TV?
Thanks in advance,
Brent
I just read the posts about OEM vs Generic and I have no problem spending a few more bucks for the Phillips lamp. I just pulled out the lamp from my LG DLP and its a OSRAM lamp.
I found the lamp for $107. on a web site. My TV is about 5 years old, what if it needs a ballast too. Im spending a lot of money on a TV thats about to see the end of its days.
Do you think I should just call is quits on this TV?
Thanks in advance,
Brent
Re: using a generic lamp in my dlp?
Guys,
I just read the posts about OEM vs Generic and I have no problem spending a few more bucks for the Phillips lamp. I just pulled out the lamp from my LG DLP and its a OSRAM lamp.
I found the lamp for $107. on a web site. My TV is about 5 years old, what if it needs a ballast too. Im spending a lot of money on a TV thats about to see the end of its days.
Do you think I should just call is quits on this TV?
Thanks in advance,
Brent
I just read the posts about OEM vs Generic and I have no problem spending a few more bucks for the Phillips lamp. I just pulled out the lamp from my LG DLP and its a OSRAM lamp.
I found the lamp for $107. on a web site. My TV is about 5 years old, what if it needs a ballast too. Im spending a lot of money on a TV thats about to see the end of its days.
Do you think I should just call is quits on this TV?
Thanks in advance,
Brent
Re: using a generic lamp in my dlp?
Philips lamps are really the way to go. Unless you have a mitsu. I noticed that they burn up philips way before the estimated 8000 hrs. But this have originally Osram lamps. (some Mitsu models) Like... Model: wd-5262a.
- grayfox
- Jedi Master
- Posts: 1049
- Joined: Sat Jun 13, 2009 9:40 pm
- Location: Sunny San Diego!
- Contact:
Re: using a generic lamp in my dlp?
thank you for sharing that experience! I'll take the opportunity to mention that for my customers lamp replacements I have used only Philips original brand lamps and I have had the best feedback in comparison to generics.
Unit Foxhound