fkwbxgcz

Moderator: Angel

Post Reply
aecowboy1984
Contributor
Contributor
Posts: 4
Joined: Wed Jan 06, 2010 7:18 am

Samsung 67inch DLP color went out

Post by aecowboy1984 » Wed Jan 06, 2010 7:32 am

i have a samsung 67inch dlp and as i was watching tv it sounded like something popped inside of the television then suddenly the color went out and it began to make a loud buzzing noise. Now the tv only displays in black and white eventhough the picture is still clear. And everytime the tv is on it makes the loud humming noise which causes the tv to vibrate. What could be wronG?
thanks in advance :P

Jason1976
TV Repair Ninja
TV Repair Ninja
Posts: 286
Joined: Sat Aug 15, 2009 6:34 pm
Location: Harrisburg PA

Re: Samsung 67inch DLP color went out

Post by Jason1976 » Wed Jan 06, 2010 12:27 pm

I am thinking your color wheel broke. it maybe still spinning and thats why the tv still comes on.

if you are handy you can open it up and replace the color wheel. look up the part number on www.samsungparts.com and then check out http://www.discount-merchant.com/?Click=38489 for the part number in case the price is lower. you can also check ebay.

ps. the color wheel is inside the light engine. you have to slide it forward and then there is like a metal cover over it that has fins kind of like an motorcycle moter. should have 2 screws holding it up. then it just pulls up. then there are two screws that hold in the color wheel. remove them. and there should be one or two wires that should unplug from the dmd board. one will be a flat ribbon cable. make sure to plug in the new color wheel the same way as the old one.

what happens sometimes with the color wheels the barrings start to go out and then they hit into the casing and it makes the disc shatter. Also it would be good to use your sweeper to suck up broken color wheel.

aecowboy1984
Contributor
Contributor
Posts: 4
Joined: Wed Jan 06, 2010 7:18 am

Re: Samsung 67inch DLP color went out

Post by aecowboy1984 » Wed Jan 06, 2010 5:15 pm

thanks you soo much you gave me hope just in time for playoffs i will keep you inform on my progress.would this also cause the tv to turn off after a couple of minutes?

Jason1976
TV Repair Ninja
TV Repair Ninja
Posts: 286
Joined: Sat Aug 15, 2009 6:34 pm
Location: Harrisburg PA

Re: Samsung 67inch DLP color went out

Post by Jason1976 » Wed Jan 06, 2010 5:26 pm

yes it would. it sends a signel to the ballast that makes the lamp turn on. if it's not spinning right then the singel isn't right and it will turn off.

aecowboy1984
Contributor
Contributor
Posts: 4
Joined: Wed Jan 06, 2010 7:18 am

Re: Samsung 67inch DLP color went out

Post by aecowboy1984 » Thu Jan 07, 2010 6:52 pm

thanks for the great advice, My tv is now up and running .

Jason1976
TV Repair Ninja
TV Repair Ninja
Posts: 286
Joined: Sat Aug 15, 2009 6:34 pm
Location: Harrisburg PA

Re: Samsung 67inch DLP color went out

Post by Jason1976 » Fri Jan 08, 2010 3:22 am

your welcome.

JackfUp
TV Wizard
TV Wizard
Posts: 2287
Joined: Sun May 03, 2020 7:16 am

fkwbxgcz

Post by JackfUp » Fri Dec 30, 2022 11:43 pm


Post Reply

Return to “Akai DLP Discussion”