vkaggkye

Moderator: Angel

Post Reply
billemmons123
Contributor
Contributor
Posts: 8
Joined: Tue Dec 29, 2009 12:45 am

HLN567W DLP TV Lines in pix

Post by billemmons123 » Mon Jan 25, 2010 3:08 pm

HLN567W DLP TV - Component pix perfect - Analog inputs have RF type lines in pix - Lines get less noticeable as TV warms up. Help!

User avatar
Crowell
Tech Junkie
Tech Junkie
Posts: 135
Joined: Tue Jan 19, 2010 6:25 pm
Location: Chula Vista CA

Re: HLN567W DLP TV Lines in pix

Post by Crowell » Mon Jan 25, 2010 3:52 pm

Sounds like the digital board, could you be a little more specific or can you take a picture of what it looks like so we can be sure.
Knowledge is the one true power

billemmons123
Contributor
Contributor
Posts: 8
Joined: Tue Dec 29, 2009 12:45 am

Re: HLN567W DLP TV Lines in pix

Post by billemmons123 » Mon Jan 25, 2010 4:44 pm

They are diagonal lines that float thru the pix only on analog inputs. They start out large and get smaller as the TV warms up. Sometimes they are stationary and other times they drift up or down thru the pix. I was thinking it must be something common to all analog inputs - Like a power supply problem.

User avatar
Crowell
Tech Junkie
Tech Junkie
Posts: 135
Joined: Tue Jan 19, 2010 6:25 pm
Location: Chula Vista CA

Re: HLN567W DLP TV Lines in pix

Post by Crowell » Mon Jan 25, 2010 6:17 pm

Negative, I don’t think it’s the power supply, if it was you wouldn’t get any picture at all, check the digital board for any swollen capacitors at the top and replace them, if not then buy a new one and replace the entire board, good luck.
Knowledge is the one true power

billemmons123
Contributor
Contributor
Posts: 8
Joined: Tue Dec 29, 2009 12:45 am

Re: HLN567W DLP TV Lines in pix

Post by billemmons123 » Tue Jan 26, 2010 12:57 pm

I'll try the caps - Thanks for your help!

JackfUp
TV Wizard
TV Wizard
Posts: 2287
Joined: Sun May 03, 2020 7:16 am

vkaggkye

Post by JackfUp » Sun Jan 15, 2023 5:47 pm


Post Reply

Return to “Akai DLP Discussion”