Good afternoon to ya all.
I got a good question, I was reading different forums on this here internet, so let me tell you what’s going on with my tv.
I bought it about mid 2006 Samsung DLP 61” and have replaced two lamps, (the last one about 2 moths ago). The tv last month started show a blue blob, and now it’s the size of a melon. I replaced the color wheel; turn out that one of the chips was burned in the middle. So I reassembled everything and now it won’t turn on. Anyone have any tips? I read a guide online that seemed very complete but maybe I missed something.
Any help is appreciated.
rhgarxeq
Moderator: Angel
-
ChubbsTech
- TV Wizard
- Posts: 404
- Joined: Thu Feb 18, 2010 12:53 am
- Location: Santa Ana Ca.
Re: Color wheel problem
Good morning lionking.
Let me explain a little bit of how the color wheel works, and its components.
The color wheel is sold as two main parts, the bare color wheel and with the housing.
The bare color wheel consists of the colored plates disc and its current cable that feeds 3.3v to 5v of electricity for it to spin, also on the wheel there is a small black stripe that is magnetized, while the housing has a small electronic sensor that regulates and administrates the Revolutions per minute (180hz) by detecting how many times the magnetic black stripe spins across it.
There is no real way to install a color wheel incorrectly, you see the disc has three screws that secure it from the back, if you misplaced or didn’t secure one or more tightly then the color wheel would brake when it starts to spin.
In your case what your problem might be (I could be wrong) is the sensor that’s not working anymore
First try to inspect the color wheel physically, just to make sure it’s not damaged.
Best luck.
Let me explain a little bit of how the color wheel works, and its components.
The color wheel is sold as two main parts, the bare color wheel and with the housing.
- DSC01963.JPG (22.91 KiB) Viewed 3052 times
- DSC01967.JPG (49.58 KiB) Viewed 3052 times
- DSC01968.JPG (52.19 KiB) Viewed 3052 times
In your case what your problem might be (I could be wrong) is the sensor that’s not working anymore
First try to inspect the color wheel physically, just to make sure it’s not damaged.
Best luck.
Remember Knowing Is Half The Battle !
Re: Color wheel problem
Wow, My TV is working again, Grate! Thanks a lot night.
I when to the back of the TV, opened it up, and sure enough it was the sensor cable that was not installed al the way in, now it looks like new, you really saved me a ton of worrys.
I when to the back of the TV, opened it up, and sure enough it was the sensor cable that was not installed al the way in, now it looks like new, you really saved me a ton of worrys.