hxnxxkurnb
Moderator: Angel
-
- Contributor
- Posts: 3
- Joined: Thu May 27, 2010 1:38 am
Blue/Red/Green squares and strips
My Samsung dlp tv has colored squares on it. It's not all of the time and does not appear on the menu or the TVGuide function. It's during live tv and when I turn on the DVD player. I'm not sure how to post a picture but I have many. Can anyone help?
- Attachments
-
- 214755[1].jpg (64.86 KiB) Viewed 2362 times
-
- 214803[1].jpg (74.37 KiB) Viewed 2362 times
-
- 214742[5].jpg (88.82 KiB) Viewed 2362 times
- ChubbsTech
- TV Wizard
- Posts: 404
- Joined: Thu Feb 18, 2010 12:53 am
- Location: Santa Ana Ca.
Re: Blue/Red/Green squares and strips
Hello caraelizab.
Looking at the pictures and seeing that the TV guide & TV menu are un affected. So we can discard the DMD board, now the probable cause is with either the analog video board or the digital video board.
Unfortunately the only way to find out which one is the responsible is to test the board using a oscilloscope. What you can do is physically check the two boards for any swollen capacitors or loose circuit.
If you have any more questions feel free to ask
Looking at the pictures and seeing that the TV guide & TV menu are un affected. So we can discard the DMD board, now the probable cause is with either the analog video board or the digital video board.
Unfortunately the only way to find out which one is the responsible is to test the board using a oscilloscope. What you can do is physically check the two boards for any swollen capacitors or loose circuit.
If you have any more questions feel free to ask
Remember Knowing Is Half The Battle !
-
- Contributor
- Posts: 3
- Joined: Thu May 27, 2010 1:38 am
Re: Blue/Red/Green squares and strips
It does not look like anything is misformed or loose. I've read about some fixes for the digital board chip but am not sure how to get to it. Any advise?
- ChubbsTech
- TV Wizard
- Posts: 404
- Joined: Thu Feb 18, 2010 12:53 am
- Location: Santa Ana Ca.
Re: Blue/Red/Green squares and strips
To be honest, it’s very difficult to say without actually being there to look at the TV. The only advice I can come up is that you find yourself a honest and down to earth tech that can help you diagnose the problem.
Sorry for only being able to help so much.
Good luck.
Sorry for only being able to help so much.
Good luck.
Remember Knowing Is Half The Battle !