Stuart
Submitted on 2008/10/28 at 5:31pm
Replaced bulb on my 52″ zenith projection… easy but the indicator light on the front is still yellow… is there a reset or did i miss something.
dgquahhb
Moderator: Angel
-
fixyourdlpblog
- Site Admin
- Posts: 71
- Joined: Thu Mar 12, 2009 10:35 pm
-
Jake
- Tech Junkie
- Posts: 114
- Joined: Thu Mar 12, 2009 11:57 pm
- Location: Tijuana, Mexico AJUAAAAAAAA!
Re: Zenith 52" Projection Indicator Light On?
Maybe this might help you
Light is Orange (blinking)>>>>The television is warming up and preparing to turn on.>>>>Wait a few minutes.
or
Light is Orange>>>>>Lamp is reaching end of life.>>>>>>>Order a replacement lamp.
n___n hope this can help
Light is Orange (blinking)>>>>The television is warming up and preparing to turn on.>>>>Wait a few minutes.
or
Light is Orange>>>>>Lamp is reaching end of life.>>>>>>>Order a replacement lamp.
n___n hope this can help
Jakey!
Re: Zenith 52" Projection Indicator Light On?
You need to reset the lamp timer, check this topic: http://www.fixyourdlp.com/forum/viewtopic.php?f=13&t=40fixyourdlpblog wrote:Stuart
Submitted on 2008/10/28 at 5:31pm
Replaced bulb on my 52″ zenith projection… easy but the indicator light on the front is still yellow… is there a reset or did i miss something.
The best "Do It Yourself" site for all types of Displays!
