Howdy!
i recently tried to replace my color wheel. That part went just fine, but I destroyed a connector on one of the cables. It is the cable that goes from the light board to the vertical board next to the optics. The cable is a 5 wire ribbon with 1 black and 4 white wires. It is cased with tubing and has an EM trap. I have included a picture of the cable and the location of the cable. If anyone knows the cable part number and where I could get one, or the connector part number that would be wonderful!!
yofdjeye
Moderator: Angel
Samsung HLP5063W cable help
- Attachments
-
- Cable location
- IMG_4813_small.jpg (192.44 KiB) Viewed 1913 times
-
- The Cable
- IMG_4811_small.jpg (91.81 KiB) Viewed 1913 times
Re: Samsung HLP5063W cable help
the cable should have a part number if it does not, You may have to call the manufacturer for the part number on this wire.
-
ChubbsTech
- TV Wizard
- Posts: 404
- Joined: Thu Feb 18, 2010 12:53 am
- Location: Santa Ana Ca.
Re: Samsung HLP5063W cable help
Hello helpme987.
You can either try soldering it your self (not very recommendable unless you have experience with electronics) or you can order a set of cables here: http://www.discount-merchant.com/Search ... 3W%20cable that I think is what you’re really looking for.
Good luck.
You can either try soldering it your self (not very recommendable unless you have experience with electronics) or you can order a set of cables here: http://www.discount-merchant.com/Search ... 3W%20cable that I think is what you’re really looking for.
Good luck.
Remember Knowing Is Half The Battle !