gobpzybz

Moderator: Angel

Post Reply
EQSD
Newbie
Newbie
Posts: 1
Joined: Wed Mar 09, 2011 8:01 pm

Philips projection HDTV 50PL9126D 50" DLP NOISE

Post by EQSD » Wed Mar 09, 2011 8:23 pm

just got the tv from a friend she said the picture doesn't come on..i open it up an took a look at the lamp an it was burnt so i replaced it with a new lamp an now the tv works fine,now i dont know if this is normal but every time i turn on the tv i hear this humming sound,like it sounds like a bumble bee or like some hair clippers but its not loud i dont think its the fan because when i turn off the tv the bumble bee sound goes away an i can quietly hear the cooling fan...should i worry an is this a issue or is it normal????

User avatar
grayfox
Jedi Master
Jedi Master
Posts: 1049
Joined: Sat Jun 13, 2009 9:40 pm
Location: Sunny San Diego!
Contact:

Re: Philips projection HDTV 50PL9126D 50" DLP NOISE

Post by grayfox » Thu Mar 10, 2011 12:30 am

Hello!
yes this can be one of 2 things,
- a fan that is malfunctioning and needs to be replaced before it causes a component to overheat
- or the colorwheel, which will start to give you hue/tint/color distortion.
The easiest way to diagnose is to open up the back shell and clip the sensor (the one that trips when the shell is removed so that the TV does not ignite with it off) and see if the noise is coming from a fan or a hub that houses the colorwheel (more towards the lamp is pointed)
Be carefull do not touch anything! there is a risk of shock or damage to the TV if you touch any components!
hope these suggestions help!
ImageUnit Foxhound

SuefUp
TV Wizard
TV Wizard
Posts: 5129
Joined: Mon Apr 27, 2020 9:41 pm

gobpzybz

Post by SuefUp » Mon Jul 10, 2023 8:56 am


Post Reply

Return to “Akai DLP Discussion”