oihkmgrc
Moderator: Angel
What the heck!
Replaced the color wheel on my hlr-5067w. Now I can't get a picture when I plug (HDMI) in my Xbox 360. Haven't shut off the Xbox. Switched out my LCD with the DLP, plugged everything back in as was before color wheel went out and now nothing. Cable TV works fine, just can't get picture on screen. Worked fine before fixing, now blank screen. What is the deal?
-
grayfox
- Jedi Master
- Posts: 1049
- Joined: Sat Jun 13, 2009 9:40 pm
- Location: Sunny San Diego!
- Contact:
Re: What the heck!
Hello,
most likely your input board is malfunctioning, is the HDMI input the only one that does not work? was the same HDMI cable used in your LCD and DLP? I had an issue with a cable once were the connectors were damaged and I was running in circles until I figured out the cable was damaged!!!
Do not worry, swapping out the input board is easy, in fact it might have gotten fried by some static when you unplugged HDMI to exchange the colorwheel (happens more than you think)
hope I can help you further...
most likely your input board is malfunctioning, is the HDMI input the only one that does not work? was the same HDMI cable used in your LCD and DLP? I had an issue with a cable once were the connectors were damaged and I was running in circles until I figured out the cable was damaged!!!
Do not worry, swapping out the input board is easy, in fact it might have gotten fried by some static when you unplugged HDMI to exchange the colorwheel (happens more than you think)
hope I can help you further...
Unit Foxhound