Hello all,
I have just completed the replacing of the colorwheel on my HLR6167W. When I try to power it on, I get a flashing Lamp light, then after about 3 minutes a flashing Lamp, Timer, Standby/Temp light.
I hear no odd sounds, and the fans are spinning.
Originally the Tv started acting up about 3 months ago (first time ever/bought in 2006). I Diagnosised problem as colorwheel. After taking everything apart, the color wheel was shattered. About 3 months went by as I waited for backordered part to arrive. I have a single prong wire that I can't find a home for. Could this be my problem? I dont recall taking this loose, but it was three months ago. See no obvious place for it. I have enclosed a picture.
Thanks for any help, and or advice
slsoujyblm
Moderator: Angel
-
onelesshat
- Contributor
- Posts: 4
- Joined: Tue Aug 18, 2009 3:17 am
Color wheel replaced, but nothing
- Attachments
-
- tv.jpg (33.61 KiB) Viewed 2226 times
Re: Color wheel replaced, but nothing
What is connected to the other end?
That cable should be connected to the DMD board.
That cable should be connected to the DMD board.
The best "Do It Yourself" site for all types of Displays!
-
onelesshat
- Contributor
- Posts: 4
- Joined: Tue Aug 18, 2009 3:17 am
Re: Color wheel replaced, but nothing
The other end is connected to the upper left corner of the board against the right wall.
